DXP Series Transformer Power Amplifier

Short Description:


Product Detail

Product Tags

DXP-400

Product Model: DXP-400

Frequency Response:1KHz(EIA)with 0.5% THD;400Wx2/8 Ω;600Wx2/4 Ω;

bridge mono: 1200W/8 Ω

Total Harmonic Distortion (THD): <0.5%, 20Hz - 20kHz

Intermodulation Distortion (IMD): 60Hz and 7kHz at 4:1,

from full rated output to -30dB =/<0.35%

Slew Rate: >10V/us

Voltage Gain: 31dB

Damping Factor (8 Ω), 10Hz - 400Hz: >200

Signal-to-Noise Ratio (referring to rated output power, 20Hz to 20kHz, A-weighted): >100dB

Crosstalk (referring to rated output power) ;At 1kHz: -75dB;At 20kHz: -59dB

Sensitivity (rated 8 Ω): 0.775V or 1.4V

Impedance: Balanced: 20KΩ

Unbalanced: 10KΩ

Connectors, Control Buttons, and Indicator Lights

- Input Connectors: One balanced XLR and one unbalanced RCA per channel

- Output Connectors (speaker connection interface): 4-POLE Speakon and a pair of binding posts per channel

- Front Panel Control Buttons: Power switch, channel gain control knob

- Rear Panel Control Buttons: Output mode switch (stereo, parallel, bridge), -input sensitivity switch (0.775V or 1.4V)

- Power Indicator Light: One blue LED

- Signal Indicator Light: One green LED per channel

- Clipping Indicator Light: One yellow LED per channel

- Fault Indicator Light: One red LED per channel, indicating channel off

Power Cord Specification

- Plug: 10A, 250V

- Wire: CCC 3x1.5mm²

Structure Protection

- Protection against short circuit, no-load, on/off noise, and radio interference

Ventilation

- Air convection mechanism from front to back

- Internal forced air cooling, fan cooling, rapid adjustment, temperature protection

Dimensions (WxHxD): 19" x 3.5" x 12.4" (482mm x 89mm x 345mm)

Net Weight: 12.7kg

Shipping Weight: 15.3kg

DXP-600

Product Model: DXP-600

Frequency Response:1KHz(EIA)with 0.5% THD;600Wx2/8Ω;900Wx2/4Ω;bridge mono: 1800W/8Ω

Total Harmonic Distortion (THD): <0.5%, 20Hz - 20kHz

Intermodulation Distortion (IMD): 60Hz and 7kHz at 4:1, from full rated output to -30dB =/<0.35%

Slew Rate: >10V/us

Voltage Gain: 33dB

Damping Factor (8 Ω), 10Hz - 400Hz: >200

Signal-to-Noise Ratio (referring to rated output power, 20Hz to 20kHz, A-weighted): >100dB

Crosstalk (referring to rated output power)

- At 1kHz: -75dB

- At 20kHz: -59dB

Sensitivity (rated 8Ω): 0.775V or 1.4V

Impedance: Balanced: 20KΩ

Unbalanced: 10KΩ

Connectors, Control Buttons, and Indicator Lights

- Input Connectors: One balanced XLR and one unbalanced RCA per channel

- Output Connectors (speaker connection interface): 4-POLE Speakon and a pair of binding posts per channel

- Front Panel Control Buttons: Power switch, channel gain control knob

- Rear Panel Control Buttons: Output mode switch (stereo, parallel, bridge), -input sensitivity switch (0.775V or 1.4V)

- Power Indicator Light: One blue LED

- Signal Indicator Light: One green LED per channel

- Clipping Indicator Light: One yellow LED per channel

- Fault Indicator Light: One red LED per channel, indicating channel off

Power Cord Specification

- Plug: 10A, 250V

- Wire: CCC 3x1.5mm²

Structure Protection

- Protection against short circuit, no-load, on/off noise, and radio interference

Ventilation

- Air convection mechanism from front to back

- Internal forced air cooling, fan cooling, rapid adjustment, temperature protection

Dimensions (WxHxD): 19" x 3.5" x 12.4" (482mm x 89mm x 345mm)

Net Weight: 13.7kg

Shipping Weight: 16.3kg

DXP-600

DXP-800

Product Model: DXP-800  

Frequency Response:1KHz(EIA)with 0.5% THD:800Wx2/8Ω;1200Wx2/4Ω;

bridge mono 2400W/8Ω

Total Harmonic Distortion (THD) <0.5%, 20Hz - 20KHz

Intermodulation Distortion (IMD) 60Hz and 7KHz at 4:1, from full rated output to -30dB =/<0.35%

Conversion Rate >10V/us

Voltage Gain: 35dB

Damping Factor (8Ω), 10Hz - 400Hz >200

Signal-to-Noise Ratio (referring to rated output power, 20Hz to 20KHz, A-weighted) >100dB

Crosstalk (referring to rated output power);At 1KHz -75dB;At 20KHz -59dB

Sensitivity (rated 8Ω) 0.775V or 1.4V

Impedance (rated) Balanced 20K Ω, Unbalanced 10K Ω

Connectors, Control Buttons, and Indicator Lights

Input Connectors One balanced XLR and one unbalanced RCA per channel

Output Connectors (Speaker Connection Interface) 4-POLE  and a pair of binding posts per channel

Front Panel Control Buttons Power switch, channel gain control knob

Rear Panel Control Buttons Output Speakonmode switch: Stereo, Parallel, Bridge

-Input Sensitivity Switch: 0.775V or 1.4V

-Power Indicator Light One blue LED

-Signal Indicator Light One green LED per channel

-Clipping Indicator Light One yellow LED per channel

-Fault Indicator Light One red LED per channel, indicating channel off

Power Cord Specification                                                                                                                        

-Plug: 10A, 250V

-Wire: CCC 3x1.5mm2

Structure Protection

-Protection against short circuit, no-load, on/off noise, and radio interference

Ventilation

-Air convection mechanism from front to back

-Internal forced air cooling, fan cooling, rapid adjustment, temperature protection                                               

Dimensions (WxHxD): 19" x 3.5" x 12.4" (482mm x 89mm x 345mm)

Net Weight: 14.5kg

Shipping Weight: 17.1kg

 

DXP-1000

Frequency Response:1KHz(EIA)with 0.5% THD;1000Wx2/8Ω;1500Wx2/8Ω;bridge mono: 3000W/8Ω

Total Harmonic Distortion (THD): <0.5%, 20Hz - 20kHz

Intermodulation Distortion (IMD): 60Hz and 7kHz at 4:1, from full rated output to -30dB =/<0.35%

Slew Rate: >10V/us

Voltage Gain: 36dB

Damping Factor (8 Ω), 10Hz - 400Hz: >200

Signal-to-Noise Ratio (referring to rated output power, 20Hz to 20kHz, A-weighted): >100dB

Crosstalk (referring to rated output power);At 1kHz: -75dB;At 20kHz: -59dB

Sensitivity (rated 8Ω): 0.775V or 1.4V

Impedance (rated):Balanced: 20KΩ

                 Unbalanced: 10KΩ

Connectors, Control Buttons, and Indicator Lights

- Input Connectors: One balanced XLR and one unbalanced RCA per channel

- Output Connectors (speaker connection interface): 4-POLE Speakon and a pair of binding posts per channel

- Front Panel Control Buttons: Power switch, channel gain control knob

- Rear Panel Control Buttons: Output mode switch (stereo, parallel, bridge), input sensitivity switch (0.775V or 1.4V)

- Power Indicator Light: One blue LED

- Signal Indicator Light: One green LED per channel

- Clipping Indicator Light: One yellow LED per channel

- Fault Indicator Light: One red LED per channel, indicating channel off

Power Cord Specification

- Plug: 10A, 250V

- Wire: CCC 3x1.5mm2

Structure Protection

- Protection against short circuit, no-load, on/off noise, and radio interference

Ventilation

- Air convection mechanism from front to back

- Internal forced air cooling, fan cooling, rapid adjustment, temperature protection

Dimensions (WxHxD): 19" x 3.5" x 14.4" (482mm x 89mm x 395mm)

Net Weight: 18.2kg

Shipping Weight: 21.4kg

DXP-1250

Model: DXP-1250

Power :1KHz (EIA) with 0.5% THD,8 ohms stereo (per channel): 1250W

4 ohms stereo (per channel): 1880W,8 ohms bridge mono: 3750W

Frequency Response (1W): 20Hz-20KHz, +0/-1dB

Total Harmonic Distortion (THD): <0.5%, 20Hz-20KHz

Intermodulation Distortion (IMD): 60Hz and 7KHz at 4:1, from full rated output to -30dB =/<0.35%

Slew Rate: >10V/us

Voltage Gain: 36dB

Damping Factor (8 ohms), 10Hz-400Hz: >200

Signal-to-Noise Ratio (ref. rated output power, 20Hz to 20KHz, A-weighted): >100dB

Crosstalk (ref. rated output power):At 1KHz: -75dB;At 20KHz: -59dB

-Input Sensitivity (rated 8 ohms): 0.775V or 1.4V

-Input Impedance (rated)

-Balanced: 20K ohms

-Unbalanced: 10K ohms

Connectors, Controls, and Indicators

-Input Connectors: One balanced XLR and one unbalanced RCA per channel

-Output Connectors (Speaker Terminals): 4-POLE Speakon and a pair of binding posts per channel

-Front Panel Controls: Power switch, channel gain knobs

-Rear Panel Controls: Output mode switch (stereo, parallel, bridge), input sensitivity switch (0.775V or 1.4V)

-Power Indicator Light:One blue LED signal indicator light,One green LED clipping indicator light per channel,One yellow LED fault indicator light per channel,One red LED per channel indicating channel off

Power Cord Specifications

-Plug: 10A, 250V

-Wire: CCC 3x1.5mm²

Protection:

Short circuit protection,No-load protection,Turn-on/off noise protection

Radio interference protection,Cooling,Forward-to-backward air convection cooling mechanism

Internal forced air cooling,Fan cooling,Quick adjustment,Temperature protection

Dimensions (WxHxD):482 x 89x 395mm

Net Weight:18.8kg

Shipping Weight:22kg

 

DXP Series Professional Amplifier | Speaking for the omnipotence  

Full power coverage | Flexible adaptation to multi-scale scenarios

 

Provide a wide range of power options from 400W to 1250W per channel

Accurate matching:

1.Small Space (DXP400): Meeting Room, Home Cinema

Medium sized venues (DXP600/800): bars, banquet halls Live house

Large venues (DXP1000/1250): theaters, music festivals, sports halls

2. Pure sound quality | Low distortion, high dynamic performance

Total harmonic distortion<0.5%, intermodulation distortion ≤ 0.35%, details restored to reality

Full frequency response 20Hz-20kHz (± 1dB), suitable for various audio sources

Conversion rate>10V/μ s, signal-to-noise ratio>100dB, fast transient response

3.System configuration freedom | Wide compatibility of connections

Supports stereo/parallel/bridge modes

6-segment adjustable gain (29-36dB), dual sensitivity options available

Equipped with XLR/LINKS balanced interface, Speakon/terminal output, seamless integration of new and old equipment

4 Stable and reliable | Professional level protection and heat dissipation

Four fold protection: comprehensive protection against short circuit/no-load/impact/interference

Intelligent fan+convection cooling, supporting long-term high load operation

Standard 19 inch rack structure, easy to install

5 Detail Design | Combining Professionalism and Usability

Unified operation logic, clear and intuitive status indication

CCC certified power supply, balancing safety and portability

"The New Benchmark for Professional Audio Amplifiers: A Sonic Revolution is Sweeping Through Your Ears!"

1. Scene Pain Point Solution

   Silent stage? Distorted equipment? Professional power amplifier to the rescue! High-power output + Hi-Fi level sound quality, making every performance heart-stirring. Singers, bands, conference rooms... Your voice deserves perfect presentation.

2. Technical Advantages

   Unveiling the core strength of professional power amplifiers! Independent cooling system + digital signal processing, rock-solid anti-interference and lightning-fast dynamic response. From delicate vocals to explosive drum beats, zero sound quality loss. The craftsmanship of engineers, the belief of audiophiles.

3.User Testimonial

   Bar owner raves: "After switching to this power amplifier, customer traffic increased by 30%! Deep bass, accurate mid-range, clear treble - even resident singers volunteer for extra performances." Professional sound quality is the hidden weapon for making money.

 


  • Previous:
  • Next:

  • Write your message here and send it to us