X5 function karaoke KTV digital processor

Short Description:

This series of products are karaoke processor with speaker processor function, each part of the function is independently adjustable.

Adopt advanced 24BIT data bus and 32BIT DSP architecture.

The music input channel is equipped with 7 bands of parametric equalization.

The microphone input channel is provided with 15 segments of parametric equalization.


Product Detail

Product Tags

Feature

This series of products are karaoke processor with speaker processor function, each part of the function is independently adjustable.

Adopt advanced 24BIT data bus and 32BIT DSP architecture.

The music input channel is equipped with 7 bands of parametric equalization.

The microphone input channel is provided with 15 segments of parametric equalization.

The main output is equipped with 5 segments of parametric equalization.

Equipped with 3 segments of parametric equalization in the center, rear and ultra-low frequency output.

The microphone is equipped with a 3-level feedback suppressor, which can be selected on / off.

16 modes can be stored in advance.

All output channels are equipped with limiters and delayers.

Built-in manager mode and user mode.

With perfect PC software, very intuitive equalizer curve.

Super strong anti-shock circuit design to better protect your equipment.

Weight 3.5kg.

Dimension: 47.5x483x218.5mm.

Instructions:

1. Power on and enter the main menu. The parameters of the main menu are set by rotating the three knobs (MIC, EFFECT, MUSIC) on the panel. The automatic keyboard lock is set in the “Auto Keyset Lock” of the “system” item. The setting takes effect after enter keyboard lock code;

2. Press the corresponding function key to enter the setting of each function item;

3. Press the same function key again to enter the lower menu setting of the function key, and cycle in turn;

4. Press “Up/Esc”, the cursor flashes in the upper row of the display screen, enter the upper setting of the display screen, and then turn the function knob “Control” to set the parameters: if there are multiple parameter settings in the upper row, press the “Up/Esc” key again , Enter the next parameter setting in the upstream, and cycle in turn;

5. Press “Down”, the cursor flashes on the bottom of the display screen, enter the bottom of the display screen, and then turn the function knob “Control” to set the parameters. There are multiple parameter settings in the bottom line. Press the “Down” key again to enter the bottom of the bottom line. One parameter setting, cycle in turn;

6. Long press the Up/Esc key to return to the main menu interface;

7. When setting the password, Mic, Echo, Reverb, Music, Recall, Main, Sub, Center, System, Save respectively represent 1, 2, 3, 4, 5, 6, 7, 8, 9, 0;


  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories